PTFE Gasket Sheet with Glass Fibre

SULON 2202 PTFE Gasket Sheet with Glass Fibre Filled with FDA approved. 1.5 mm, 2 mm, 3 mm thickness in large quantity. You can have them from us in a short time.

Send Inquiry

Product Description

PTFE Gasket Sheet with Glass Fibre Filled - Kaxite 2202

PTFE Gasket Sheet with Glass Fibre filled provides increased potential to deal with creep and wear compared to Virgin PTFE. It is developed using a 10%, 15%, 20% or 25% glass fibre filler which enhances the dimensional firmness of the polymer and also helps to slightly lessen deformation under load.

10%, 15%, 20% or 25% Glass filled PTFE gasket sheet is needed to improve the creep resistance of PTFE over-all temp varieties, even though still permitting some compression needed for sealing in gaskets and valves. You will find better wear and electrical properties, as glass fibre is surely an insulator. 10%, 15%, 20% or 25% glass filled PTFE gasket sheet has an excellent resistance to water. Nevertheless offering superb chemical steadiness, PTFE +25% Glass Fibre has better thermal conductivity and coefficient of friction when mixed with MoS2 or graphite filled PTFE.

PTFE Gasket Sheet with Glass Fibre filled is primarily used in purposes where higher resistance to attrition and improved material durability is required. It is primarily created into valve seats, gaskets, pump housings, filter housings, shaft seals, slide runners, pump and instrument components, electric powered insulators, gaskets, seals, washers and shaft bearings that work at low pressure/velocity values.

Ningbo Kaxite Sealing Plastics Limited also provides in-house CNC machining and tooling capabilities to your requirements. Our company offers precision mincing and cutting to personalized shapes a colours, with full excellent product certification.

Key Features of Glass Filled PTFE:

• Advanced dimensional steadiness and effectiveness against compared to conventional PTFE
• Extremely good chemical resistance against virtually all media
• Fantastic resistance to low and high temperature
• Provides very low moisture consumption
• Exceptional Temp: -260°C up to +260°C
• Excellent electrical insulation properties
Ningbo Kaxite Sealing Plastics Limited is an established and experienced Glass Filled PTFE supplier and manufacturer, to a range of industries throughout the China.

Physical Properties

Properties	Testing Method	Kaxite 2202	Kaxite 2200	Kaxite 2210
Sealability (ml/h)	ASTM F 37A	0.14	0.19	0.04
Creep Relaxation (%)	ASTM F 38	21	17	23
Compressibility (%)	ASTM F 36	12	13	9
Recovery Min. (%)	ASTM F 36	30	40	40
Tensile Strength (MPa)	ASTM F 38	12	13	13