25% Glass Fiber Filled PTFE Rod
Kaxite is a leading China 25% Glass Fiber Filled PTFE Rod manufacturers. We can make full ranges of galss filled PTFE rod such as 15% Glass fiber with 5% MoS2 filled PTFE rod, 20% Glass fiber with 5% MoS2 filled PTFE rod, goods in high quality and short delivery time.
Send Inquiry
Product Description
25% Glass Fiber Filled PTFE Rod - GT25
25% glass fibre filled PTFE rod is made of 75% PTFE mixed with 25% glass fiber, glass fibre is the most commonly used filler in PTFE and it offers much improved compression and wear properties to PTFE. The glass filled ptfe rod material may also be inert gas sintered to further improve creep properties and reduce porosity and gas permeability (there would be a consequent loss of tensile properties).Glass Fiber Filled PTFE Properties
Glass fiber filled PTFE is reinforced with glass fibres with the percentage varying between 5% and 40% depending on the needs of the application. As the filler percentage increases so does the properties the filler offers (increased compressive strength, lower deformation under load) but conversely the coefficient of friction properties of the material increases over that of virgin PTFEOther types of Glass Fiber Filled PTFE Rods
GT5 - 5% Glass Fiber Filled PTFE RodGT10 - 10% Glass Fiber Filled PTFE Rod
GT20 - 20% Glass Fiber Filled PTFE Rod
G20M - 20% Glass Fiber and 5% Mos2 Filled PTFE Rod
G15M - 15% Glass Fiber with 5% Mos2 Filled PTFE Rod
Properties of 25% Glass Filled PTFE
Hot Tags: 25% Glass Fiber Filled PTFE Rod, China, Manufacturers, Suppliers, Factory, Wholesale
Related Category
Send Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
